Model specification GD5X-350Y
Outline Size 4600*2150*2500(L*W*H)
Net Weight 1800kg
Volume of Material Box 500L
Melting Time 45minutes
Generator Section Alternator Yanmar Gasoline Generator Set 
Start-Up mode auto
Rated Power 25.4HP
Automatic thermostatic Control System Fuel Tank Volume 82L
Hydraulic Tank Volume 82L
Heat Conduction oil volume 90L
Electric Heating hose and bumer Burner US12V/DC105000-350000Btu/H
Electric Heating tube 75V/1.5Kw
Promote Winch 12VDC 300W
1. Temperature Control Box
Double Digital LCD temperature controller, timely display and adjust the heat transfer oil temperature, sealant temperature and irrigation hose temperature.

2. Irrigation gun
The unique electric control switch on the handle of the gun can remotely control the pump and reduce the waste of sealant. To guarantee the best construction effect.

3. Repeat the cycle heating system
The sealant melted at the bottom of the hot melt kettle can be returned to the upper part of the hot melt kettle to double heating the sealant so as to reduce the waiting time and provide the longest operation time for the construction.

4. External discharge pump
It has a larger volume than the immersion discharge pump, maintenance and replacement are more conveniently and quickly.

5. Heat conduction oil system
Melt with a heat transfer oil hot melt kettle, indirect heating, the temperature can be adjusted on demand, automatic temperature control system, will never burn the filling material. The hot melt kettle thermal transfer oil sandwich design than similar products using less heat transfer oil, to further improve the heating rate, reduce the replacement cost.

6. Special geometry structure of the combustion chamber
Flame to 45°oblique angle to the combustion chamber wall, not with the hot-melt kettle in direct contact with the hot room air, combustion, high heat utilization.

7. Discharge hose
meters long electric heating hose than usual 4.5 meters long hose operating area increased by more than 78%, after a specially improved heating hose is more resistant to bending.

8. The lowest charge height
The whole machine structure is compact and reasonable, low operating position and filler port, ensure the feeding operation is convenient, energy saving and safety.

9. All-in-one machine of grooving and sealing.
The crack router is integrated on the bottom of the crack sealing machine, freely loading and unloading through the hanging arm, construction and transportation are more conveniently

Leave a Message

Please fill in your name and your message and do not forget mail.

Learn, Fighting, Cooperate, Share, Thankful